 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DA227Y Diodes Switching diode DA227Y Applications Ultra high speed switching Dimensions (Unit : mm) 1.60.05 1.60.1 Land size figure (Unit : mm) 0.5 0.45 0.130.05 0.220.05 (4) (3) 1.60.1 1.60.05 1.20.1 Features 1) Ultra small mold type. (EMD4) 2) High reliability. 00.1 1.0 (1) (2) 0.5 0.50.05 EMD4 Construction Silicon epitaxial planar 0.5 1.00.1 Structure ROHM : EMD4 JEITA : SC-75A Size dot (year w eek factory) Taping specifications(Unit : mm) 4.00.1 2.00.05 1.50.1 0 1.750.1 0.30.1 3.50.05 1.650.1 5.50.2 8.00.2 1.55 1.70.05 1.650.1 1PIN 4.00.1 0.80.1 00.1 0.650.1 Absolute maximum ratings (Ta=25C) Limits Symbol Unit 80 VRM V 80 VR V 300 IFM mA 100 Io mA 4 Isurge A 150 Pd mW/Total 150 Tj -55 to +150 Tstg 100 MH *1 Pd=120mW when only 1 circuit is operating. CONDITION = Each terminal mounted on a recommended land pattern. (0.35x0.9mm) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Forward current (Single) Average rectified forward current (Single) Surge current t=1us (Single) Power dissipation *1 Junction temperature Storage temperature Rated in slash put frequency Electrical characteristics (Ta=25C) Parameter Forward voltage Reverse current Capacitance between terminals Reverse recovery time Symbol VF IR Ct trr Min. Typ. Max. 1.2 0.1 3.5 4 Unit V A pF ns Conditions IF=100mA VR=70V VR=6V , f=1MHz VR=6V , IF=5mA , RL=50 1.650.01 Rev.A 1/2 DA227Y Diodes Electrical characteristic curves (Ta=25C) Ta=150 100 Ta=75 Ta=125 REVERSE CURRENT:IR(nA) 10 Ta=25 Ta=150 Ta=-25 1 10000 1000 100 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=125 10 f=1MHz FORWARD CURRENT:IF(mA) Ta=75 Ta=25 10 1 0.1 0.01 1 Ta=-25 0.1 0 100 200 300 400 500 600 700 800 900 100 0 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 0.1 0 10 20 30 40 50 60 70 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 80 0 5 10 15 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 20 950 FORWARD VOLTAGE:VF(mV) Ta=25 IF=100mA n=30pcs 100 90 REVERSE CURRENT:IR(nA) 80 70 60 50 40 30 20 10 0 VF DISPERSION MAP AVE:9.655n Ta=25 VR=80V n=10pcs 10 9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25 VR=6V f=1MHz n=10pcs 940 8 7 6 5 4 3 2 1 0 AVE:1.17pF 930 920 910 AVE:921.7mV 900 IR DISPERSION MAP Ct DISPERSION MAP 20 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 15 8.3ms 10 1cyc RESERVE RECOVERY TIME:trr(ns) 10 9 8 7 6 5 4 3 2 1 0 IFSM DISRESION MAP trr DISPERSION MAP AVE:1.93ns PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25 VR=6V IF=5mA RL=50 n=10pcs 5 Ifsm 8.3ms 8.3ms 1cyc 4 3 2 5 AVE:3.50A 0 1 0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 100 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm t 1000 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) Rth(j-a) 10 9 ELECTROSTATIC DISCHARGE TEST ESD(KV) 8 7 6 5 4 3 2 1 0 10 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 C=200pF R=0 C=100pF R=1.5k AVE:0.97kV AVE:2.54kV 100 Rth(j-c) Mounted on epoxy board IM=1mA IF=10mA 10 10 1ms time 300us 1 0.1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 1 100 1 0.001 ESD DISPERSION MAP Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of DA227Y
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |